V6 Air Filter Replacement

by: Crash893


Background:

The air filter should be changed as part of the [[scheduled maintenance]]. A new filter will help performance and fuel efficiency.

Tools:

  • Phillips screwdriver
  • Small flathead screwdriver

Parts:

  • New Air filter

  • Remove Intake piping
IMG_1924.JPG
  • Remove Intake Tube using a Phillips (1), Wire Connectors (2,3) ,hose(4) and Clips(5)
IMG_1925.JPG
  • To remove Connector 2 push down on the small wire and pull away
IMG_1927.JPG
  • To remove MAF wire harness (3) insert a small screw driver between the clip and the clip housing and pull away from the MAF
IMG_1928.JPG
  • To disconnect the hose (4) pull straight down ( no trick to it)
IMG_1931.JPG
  • The upper housing should be free now, Move the wire harness out of the way and remove the housing, place in a safe area.
IMG_1934.JPG
  • Before you insert the new filter clean the large derbies screen located inside the empty housing.
IMG_1932.JPG

*unscrew the retaining screw and lift straight up. Clean with compressed air or a good knock on something
IMG_1933.JPG

  • Reinsert the derbies Screen and new filter
  • Reassemble is the in reverse order
Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-ShareAlike 3.0 License