by: captainfantastic
Background:
How To Remove Rear Door Pannel
Tools:
- Philips Screwdriver
- small flathead Screwdriver
- Torx 25
Parts:
- ETKA No.: 3B0 868 243 (optional)
1 )Removing the handle cover:
be careful if having net-optic or wooden covers
very tight, because of this clamps:
next step, turning counterclockwise:
Torx 25,to remove(Bottom of door):
now you have to pull away the panel from the door.It´s fixed with plastic clips
After this lift up the back area of the panel:
Then lift up the whole panel, and you see this:
You have to remove the hooked cable:
(shots are made upside down)
Then disconnect the puddle lights, and the power windows (not shown)
here you can see the hooked cable and the (don´t know the word for "Stecker") housings for wiring
Note:
It´s easier if the window is rolled down.
I would recommend to buy some of the plastic clips which are fixing the door panel first.
ETKA No.: 3B0 868 243 , 0,55€ each
BTW:
Only the drivers door is a little bit different:
Removing the cover:
lifting:
disconnect the power windows:
